WAAAAAAAY back in October, I shared what I had packed in a simple plastic organizer to help me get some jewelry made when I'm away from the house. I started that post with the words, "I wouldn't get as much jewelry made if it weren't for my handy-dandy Bead Box." I spoke too soon. That stocked box of designed jewelry has been lingering around since then, following me from place to place, taunting me. I even forgot what some of the designs were supposed to be. This week, I sat down and made myself complete the last couple of designs...finally. I'm going out of town soon and hope to have it re-stocked to take with me. For now, here's a reminder of what the fifth version of this stocked box looked like.
Let me go ahead and admit that the wrap bracelet in the far left compartment isn't done and won't be making an appearance in box 6. I just can't tote it around anymore. I'll never get it done. However, the rest of the designs were completed. One has already sold on Etsy and several others are already for sale either there or at Southern Antiques and Accents. If you need a refresher of the before pictures (I did), take a look at Bead Box 5 - Stocked. Now, let's take a look at the after!
These simple upcycled tin and bead earrings have already sold on Etsy. I should probably make some more similar since they're such a lovely little design.
This isn't the best picture of this necklace that combines acrylic paint poured tin (reversible), brass beads, and chain. However, it's a great shape and available at Southern Antiques and Accents (SAA).
I totally love the combination of hot pink tassel, distressed brassy tin, and more paint poured tin for the long pendant in this necklace. Golden beads and chain were used to make the long chain. This Hot Pink Flow Necklace is available on Etsy.
I can't get enough of the tin, and buttons have always been one of my favorite elements with which to work. The stacks of tin and buttons were already made when I added them to the box. It was just a matter of creating the bead connectors and attaching them to ear wires. You can find these Spring Sky Earrings on Etsy.
I was excited about this necklace when I designed it, and I'm not disappointed. The array of white shades in the beads along with the juxtaposition of the fabric and upcycled tin on the pendant just make me giddy. As with the pieces above, the Frayed White Shades Necklace is for sale on Etsy.
This box seemed to be full of long pendants that are just combinations of vintage found objects that make me smile. That's exactly the case with this necklace that simply combines a key, a chandelier crystal, and a vintage button. I added a beaded charm to the front of the key to match the handmade beaded chain that I created. You can find the Button Crystal Key Necklace in the Etsy shop.
Salvaging old jewelry to make it new again is one of the things I love to do. In this case, I took an old brooch and removed the pin mechanism to make it a pendant. Chinese crystals and golden beads were wire-wrapped together to make the front part of the chain while basic gold-color chain finishes the necklace. This necklace will be available at Southern Antiques and Accents in the coming weeks.
These elements should have been super easy to combine, but I struggled with them for some reason. I was finally able to coax the bronze PMC charms, vintage buttons, and my own wordy washers to come together cohesively in this pair of earrings that will likely end up on Etsy.
When I matched up the elements for this necklace, I was elated that I was able to get that minty, pistachio green color to match in all the pieces. However, when I started to bring them all together into a necklace, it was just too much. I broke it up with some gunmetal-colored seed beads to finish this pretty little Pistachio Journey Necklace that is already on Etsy.
I added antiqued brass beads to this design to break up the mother of pearl buttons and to echo the brass bell at the bottom of the pendant. I like this necklace a lot and plan to list it on Etsy before too long.
There was a bit of a snag with this necklace when the tassel fell apart on me. (I failed to make sure the knot holding it together was tight and glued - my own fault!) Once that was fixed, the rest of the chain came together beautifully with jade and copper beads. It will be heading to Etsy.
This is the main necklace whose design idea got lost between coming up with it and making it. Not all of the elements for the design were in the same compartment in the bead box. I kept finding a baggie of buttons in the box that I couldn't figure out why they were there. I should have looked at the original post for the answer. Dur! Instead of using the buttons, I found these salvaged glass beads in a coppery, rust color that I used to break up the other beads. It worked out just fine. I think this one will likely go to Etsy as well.
There really wasn't much to this design. Of course, I have no idea what my original idea had been, but I really think I made this work out well with the elements I gave myself. I simply wired everything together then added a bit of chain. The clasp and jump ring aren't agreeing at the moment, so I will have to fix that before I take it to SAA.
Heavens knows what I had planned for this small collection of five buttons. I went with the flow and simply wired them together to create this simple necklace. I'm tempted to do a tutorial on how I created it. Would you be interested in that? Let me know. As for the necklace, it'll be hitting the shelves at SAA soon.
Like some of the other designs, I decided that I needed a little something else to go with the originally selected elements. In the case of this necklace, I added the large round, faceted crystals to the smokey topaz crystals in the chain. The back is a simple antiqued brass chain. Watch for this one coming to Etsy!
Nothing had to be added to this design. It simply needed to get wire wrapped together. I love the faux watch look of it and the sparkle from the crystals and the distressed tin. It's destined for Etsy.
I'm so glad to have that bead box finally emptied and ready to fill back up. I don't really know what took me so long to work my way through it. But, I have a feeling that it was my need to add additional elements to the designs while I wasn't within reach of those new elements. For my own sake, I hope to plan out the designs a little better to keep my productivity moving. I'll share with you when I get Bead Box 6 stocked up. If you're interested in my previous Bead Boxes and reveals, here are the links for you.
Thanks for stopping by!